Hand Tools

For easy access into tight spaces Rear exhaust directs air away from work piece Inlet screen for extended tool life Safety lever prevents accidental starts Grease fitting in gear head for easy maintenance Standard Accessories:...

Insulating rubber grip for operator safety and comfort Rear exhaust directs air away from work piece Inlet screen for extended tool life Safety lever prevents accidental starts Standard Accessories: Wrenches Collet Size 1/4" Mini Free...

Knurled bezel rotates 360º Stainless steel rack and contact points Includes revolution counter Easy-to-read white face dial Range 0 – 1", increments 0.001" Range per revolution 0.1" Increments 0.001" Type Dial Range 0 -...

Large easy to read digital display On/Off switch prolongs battery life Easy switch for inch/mm readings Measures 0 - 6" in 1/1000" increments or 0 - 150mm in 0.01mm increments Plastic case  

Slide hammer with 5 lb hammer Rear axle pulling plate 3-way cross head 2-way cross block Nut Grip wrench adaptor Dent puller attachment and screw 3 pulling jaws, nuts and bolts Puller hook attachment Description 2 Ton  

Cushion-grip Contents: Telescopic Magnetic Tool (027292): Capacity: 3.5 lbs - Extends 6-1/4" to 33-1/4" Telescopic Mirror (029293): Diameter: 2-1/4" - Extends 9-3/4" to 36-1/2" Description 1 of each 027292, 027293  

Cushion grip Mirror diameter: 2-1/4" Extends: 9-3/4" to 36-1/2" Description 2-1/4"  

Cushion-grip Capacity: 3.5 lb Extends: 6-1/4" - 33-1/4" Description 6-1/4" - 33-1/4"  

Capacity: 3.5 lbs 5-1/4" - 28" long Description 5-1/4" - 28"  

60" rubber wire and insulated clip

10" multipurpose scraper 9" multipurpose scraper 7-1/2" Scratch awl 7-1/2" Cotter pin puller Radiator hose remover

Awl-straight pick Hook tool 45° bent tip tool 90° bent tip tool  

For removal of filters 2-3/4" to 3-5/8" in diameter Cushion handles Slip joint For removal only  

For filters 2-7/8" to 3-1/4" diameter Swivel handle

5/8, 3/4, 13/16, 7/8" Description 5/8, 3/4, 13/16, 7/8"  

17, 19, 21, 23mm Description 17, 19, 21, 23mm  

17, 19, 21, 23mm Description 5/8, 3/4, 13/16, 7/8"

Black tape Operating temperature: -7° C – 80° C Package Qty: 10 Case Qty: 200 CSA Approved  

Wooden handle  

All components forged from superior quality Chrome Vanadium steel Push button quick release holds socket securely Convenient easy-use reversing switch Meets or exceeds ANSI specifications Drive 1/2" Teeth 36 Length 10"  

All components forged from superior quality Chrome Vanadium steel Push button quick release holds socket securely Convenient easy-use reversing switch Meets or exceeds ANSI specifications Drive 3/8" Teeth 36 Length 8"  

All components forged from superior quality Chrome Vanadium steel Push button quick release holds socket securely Convenient easy-use reversing switch Meets or exceeds ANSI...

Reinforced Malleable steel frames Max. Opening 8"  

Reinforced Malleable steel frames Max. Opening :  6"    

Reinforced Malleable steel frames Max. Opening 4"  

Reinforced Malleable steel frames Max. Opening 3"    

Reinforced Malleable steel frames Max. Opening 2"  

S.A.E. and Metric combined One die and tap of each One tap wrench and die stock One T-handle tap wrench One S.A.E and one Metric thread gauge One screwdriver Taps and Dies are heat treated to Rockwell C58-C61 S.A.E. #4-12, 1/4-1/2" NC & NF,...

Heat-Treated Rockwell hardness C58 – C61 Tested for strength, hardness and cutting ability Includes: Die stock Tap handle 11 metric taps & dies Metric M5 x .8, M6 x .75, M8 x 1.0, M10 x 1.25, M12 x 1.5, M5 x .9, M6 x 1.0, M8 x 1...

Heat-Treated Rockwell hardness C58 – C61 Tested for strength, hardness and cutting ability Includes: Die stock Tap handle 11 S.A.E. taps & dies S.A.E. 1/4"-20NC, 5/16"-18NC, 3/8"-16NC, 7/16"-14NC, 1/2"-13NC, 1/4"-28NF,...

Includes 1/8, 3/16, 15/64, 5/16, 3/8, 15/32, 9/16"

Includes #1 - 1/8 - 1/4"#2 - 1/4 - 5/16"#3 - 5/16 - 7/16"#4 - 7/16 - 9/16"#5 - 9/16 - 3/4"

Dual heat-treated Chrome Vanadium steel A type, shape and size for every job Cold Chisels 3/8 x 5-1/2", 1/2 x 6", 5/8 x 6-1/2" Pin Punch 3/32 x 4-1/4", 1/8 x 4-3/4", 5/32 x 5-1/4", 3/16 x 5-1/4", 1/4 x 5-3/4" Taper Punch 3/32 x 5-1/4",...

Jumbo style for big jobs Vinyl pouch Cold Chisels 1/2 x 6-3/4", 5/8 x 7", 3/4 x 8", 15/16 x 10", 1 x 10" Pin Punch 3/16 x 8", 1/8 x 6" Taper Punch 3/8 x 8", 3/16 x 10", 3/8 x 10" Centre Punch 3/16 x 6" Concrete Chisels 1/2 x...

5 pin punches: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" x 5-3/4" 1 centre punch: 3/16" x 6" Dual heat treated chrome vanadium steel Pin Punch 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" x...

Heat-treated alloy steel All models 2nd cut for general purpose use Double injected handles provide superior grip and user comfort 8" Flat File 8" Half Round File 8" Taper File 8" Round File 8" Square File Flat File 8" Half Round...

Description Width adjustable from 10" to 12"

Description 18 lbs x 60" x 1-3/8" shank

Dual material handles for sure grip Hardened and tempered CR40 steel 8, 12, 18 and 24" Description 8, 12, 18, 24"

1 each: 6", 12", 16", 20" Heat treated tempered drop forged steel Description 6, 12, 16, 20"